55M4000BCE00 REV A
9
Provided password is used the calibration menu will remain accessible until the system
is powered off. The password will be required every time the menu is selected after a
power on.
Your password number is:
98765
2.2 Step #2: “Enable/Disable sensor” Setting
Note: these settings reflect the configuration of your system and will generally be
made during factory testing prior to delivery and should not need changing.
1-
In the calibration menu, scroll up or down to the menu "Enable/Disable sensor".
2-
Press
“
”
to enter this menu.
3-
Scroll to select the sensor option to edit.
4-
Press
“
”
to highlight the value to edit. Scroll up or down to change to value
then Press
“
”
to confirm.
5-
Any change made is permanently registered after confirmation.
6-
Press
Escape key
at any time to exit the menu when done.
All remaining items in the list are optional and set to OFF if not used.
Refer to the wiring diagram supplied with your system to determine which sensor
should be enabled, this will be indicated by a table or a notation adjacent to each
component.
2.3 Step #3: “Calibration units” setting
1-
In the calibration menu, scroll up or down to the item "Calib units:".
2-
Press
“
”
to toggle between metric and imperial.
imperial
:
use x1000lbs and feet.
metric
:
use metric tons and metres (1 metric ton = 1000 kg).
Содержание i4000
Страница 2: ...55M4000BCE00 REV A 2...
Страница 14: ...55M4000BCE00 REV A 14 Rooster sheave geometry Fly jib geometry...
