Rayco Super Jr RG27 Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 66

background image

RG27/35/37 Operation • Service • Maintenance

800.392.2686

9

Safety

General Hazard Information

• Read, understand and follow all instructions on the

machine and in the manuals before attempting to operate.

Keep all manuals in a safe place for future reference and

for ordering replacement parts.

• Familiarize yourself with all controls in a safe environment

before operation. Know how to stop the machine and

disengage the controls quickly.

• Never allow minors to operate this machine.
• Never allow anyone who has not had proper instruction

to operate this machine.

• Keep bystanders, children and pets away from the

machine and work area.

•  Never allow anyone to ride on this machine.
•  Never transport cargo, tools or wood on this machine.
•  Keep the operator zone and adjacent area clear for

safe, secure footing.

• Use the machine in daylight or under good artificial

lighting.

• Use this machine for its intended purpose only, deviation

from the machines capabilities could damage the

equipment and cause injury or death.

Engine exhaust contains products of combustion which can
be harmful to your health. Always start and operate the engine
in a well ventilated area. If you are in an enclosed area, vent
the exhaust to the outside.

Personal Protective Equipment

Head protection -

must conform to ANSI Z89.1 and DO

NOT wear under chin strapping while operating or within the
operation area of the Horizontal Grinder.

Eye protection -

must conform to ANSI Z87.1 and be the wrap

around style. Always wear the eye protection when operating
or working within the operational area of the machine.

Hearing Protection -

Plug type ear protection or full ear

coverage devices (muff type) shall be worn at all times when
operating or within the operational area of the machine.

Gloves -

When operating or handling brush within the

operational area of the Horizontal Grinder, loose fitting
gloves are the only gloves that should be worn. DO NOT
wear gauntlet or strapped gloves.

Clothing Protection -

Clothes must be close fitting, but

not restrictive of movement. DO NOT wear loose fitting
clothes, jewelry or long dangling clothing; i.e. neckties, long
belts or chains.
Hooded sweat shirts may be worn only if the hood is tightly
drawn around the face with drawstrings tucked into the
outer garment when not in use. If working near traffic, wear
reflective clothing.

Shoes -

(Foot Protection)- Always over the ankle work boots

with skid resistant soles.

Breathing Protection -

When breathing protection is required

the use of paper masks that can tear away if caught or
entangled in material or machine must be worn.

Flying Debris

Do not allow anyone to stand in front or directly behind the
machine.

Flying debris could be thrown past guards and

injure bystanders if they are in these areas.

«
...
7
8
9
10
11
...
»

Содержание Super Jr RG27



































































Отзывы:

Нет отзывов

Похожие инструкции для Super Jr RG27

Бренд: Jepson Страницы: 6

FXABGAG-710-ZSII

Бренд: FXA Страницы: 48

Бренд: Universal Tool Страницы: 9

Бренд: tresnar Страницы: 35

Бренд: KitchenAid Страницы: 12

Бренд: KitchenAid Страницы: 14

Бренд: KitchenAid Страницы: 52

Бренд: Sealey Страницы: 3

Бренд: Sealey Страницы: 3

Бренд: Sealey Страницы: 4

Бренд: KingCraft Страницы: 18

Бренд: Team Kalorik Страницы: 44

Бренд: KRESS Страницы: 12

Бренд: Parkside Страницы: 108

Бренд: Fein Страницы: 99

Бренд: Hario Страницы: 2

Бренд: Hobart Страницы: 6

Бренд: La Marzocco Страницы: 34

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды