manualshive.com logo in svg

Ravenheat HE 120N, Инструкция по использованию, установке и обслуживанию

Поделиться
Скачать
Ravenheat HE 120N Скачать руководство пользователя страница 17

Supplied By www.heating spares.co  Tel. 0161 620 6677

      

17

SALAMANDER CORROSION GUARD

Salamander (Eng) Ltd 
Tel: (0121) 3780952 /4508

4.8.10   Hard water areas

 

If the area of installation is recognized as hard 
water, it is recommended that a suitable water 
treatment device is installed in the mains.

 

The water hardness can be determined by using 
the standard test paper or by referring to local 
water authority.

4.9 DOMESTIC 

WATER

4.9.1  

The domestic hot water must be in accordance 
with the relevant recommendations of BS 5546. 
Copper tubing to BS 2871 1 is recommended 
for water carrying pipework and MUST be used 
for pipework carrying potable water.

4.10 ELECTRICAL 

SUPPLY

 

Warning: this appliance must be earthed

4.10.1 

External wiring to the appliance must be carried 
out by a competent person and be in accordance 
with the current I.E.E. Regulations and local 
regulations which apply. The Ravenheat boiler is 
supplied for connection to a 230 V ~ 50 Hz single 
phase supply. 

The supply must be fused at 3 A.

NOTE. The method of connection to the 
electricity supply MUST facilitate complete 
electrical isolation of the appliance, by the 
use of a fused, double pole isolator, having a 
contact separation of at least 3 mm in all poles. 
The point of connection to the electricity supply 
must be readily accessible and adjacent to 
the appliance except, where the appliance is 
installed in a bathroom, this MUST be sited 
outside the bathroom.

SECTION 5

 INSTALLATION

5.1 WARNING

5.1.1  

It is MOST IMPORTANT that this appliance is 
installed in a VERTICAL POSITION, with the 
flue air duct passing through the wall. 

 

Make sure flue slopes 2.5° down towards the 
boiler that is 45 mm/m fall per metre of flue 
length 

(Fig.11).

5.3 

UNPACKING OF BOILER

5.3.1 IMPORTANT: 

With regards to the Manual

                    Handling Operations, 1992 Regulations, 

the following lift operation exceeds the 
recommended weight for a one man lift.

                    

5.3.2

           - Stand the boiler carton upright.

                   - Open the top of the carton
                   - Rest the carton on the fl oor 
                      (keeping the  fl aps open)
                   - Turn the carton over with the boiler inside

                      and then pull tha carton   
                   -  Rest the boiler on the fl oor and remove the 
                      polystyrene guards

5.2 DELIVERY

5.2.1 

The appliance carton containing  

 

a) boiler fully assembled with fl ue adaptor

 

b) installation instructions ,

 

  user instructions and Benchmark log book

 

c) white paper template

                    d) hanging bracket
                    e) guarantee card
 

f ) Polythene bag containing 

 

 

    

 - 2-22 mm compression ball valves 

                           complete with 3/4”  washers
 

     - 1-15 mm compression ball valves

                            complete with 1/2”  washers
                         - 1- 15 mm compression ball valve    
                         - 2 coach bolts and wall plugs
 

    - screws and dowels        

  IMPORTANT NOTES :

  T

his appliance will produce a plume of 

  condensation     in cool weather.This is due
   to the High Effi cency and hence low fl ue 
   gas temperature of the boiler.
   See Optional extras (Fig.15) 

5.4 

POSITIONING OF THE BOILER

5.4.1 

   Remove the 2 lower and the 2 upper

            screws that secure of the front panel,
            and then lift off . 

5.4.2  

Unscrew the 4 screws that fasten the lower 
grating on the casing and remove it from the 
bottom of the casing  

5.4.3    

Make sure the casing and screws 

are put to one side in a safe place.

    

Fig.11

Содержание HE 120N




















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды