CHAPTER
7
Troubleshooting: Motor Control ECU LED Status Indicators
55
CHAPTER 7
TROUBLESHOOTING
MOTOR CONTROL ECU LED STATUS INDICATORS
The Sidekick Pro ICD integrated motor control ECU displays the status of the injection pump with the following
ECU status indicators.
FIGURE 1. LED Status Indicators
TABLE 1.
LED Status Indicators
LED
Status Display
Logic Power
If logic power is present at the motor control ECU, the logic power
indicator will be on.
High Current Power
If high current power is present at the motor control ECU, the high
current power indicator will be on.
CAN Status
The CAN status indicator will flash once per second if the motor
control ECU is communicating on the ISOBUS. If the motor control
ECU cannot communicate via the ISOBUS, the CAN status indicator
will flash four times per second.
Flow Switch State
The flow switch indicator will flash when flow is detected from both
sides of the pump.
Calibration Switch
State
The calibration switch indicator will flash when a metal object is
passed by the calibration switch sensor.
Cal Switch State
Calibration
Switch
Flow Switch State
CAN Status
High Current Power
Logic Power
