CHAPTER 4
22
SideKick Pro™ ICD 1-40 oz./min. and 5-200 oz./min. Installation & Operation Manual
FIGURE 7. 50 gallon [189.27 L] Injection Module Platform and Tank Dimensions (P/N 117-0175-035)
TABLE 5.
50 gallon [189.27 L] Injection Module and Platform Dimensions
MOUNT THE CHEMICAL TANK
NOTE:
If a Raven injection module is used, the supplied platform provides an ideal mounting configuration
for the Sidekick Pro™ ICD injection pump and chemical tank.
• Mount the chemical tank as close as possible to the injection pump. Minimize the length of the hose between
the chemical tank and injection pump. Avoid any product lines longer than 5 ft. [1.5 m] between the chemical
tank and injection pump inlet port.
NOTE:
Long product lines between the chemical tank and injection pump may cause high vacuum pressures
on the pump inlet, long pump priming times, difficulty priming the pump, and larger amounts of
chemical waist during rinsing.
If vacuum errors are encountered during pump operation, perform one or both of the following
corrective measures to reduce inlet pressure:
•
Reduce the inlet plumbing length
•
Increase the tubing diameter
• Mount the Sidekick Pro™ ICD pump so that the line between the injection pump and chemical supply tank is
near level with a slight incline to help relieve air bubbles. The line connected to the pump inlet must not raise
chemical more than 2 ft. [0.6 m] from the chemical supply tank outlet.
Module Dimensions
Platform Dimensions
Mounting Port
Dimensions
Width (A)
Depth
Height (E)
Width (C)
Depth (B)
Width (D)
Depth (F)
37”
[94 cm]
16.92”
[42.98 cm]
62”
[157.5 cm]
26.25”
[66.68 cm]
12.25”
[31.12 cm]
24”
[61 cm]
6.75”
[17.15 cm]
4” [10.2 cm]
nominal
3.38” [8.59 cm]
nominal
F
C
B
D
E
A
