Raven SC1, Руководство по эксплуатации

Страница: 57 / 111

GPS Settings: Configure GPS in the SC1/TC1 53
GPS SETTINGS
CONFIGURE GPS IN THE SC1/TC1
FIGURE 3. GPS Setup Page
POSITION ACCURACY SETUP
FIGURE 4. Position Accuracy Setup Page
• Status - Displays the absolute status of the GPS accuracy. Statuses that may be displayed in this area include:
◦
No Signal
◦
Error
◦
Converging
◦
Converged
• Current Accuracy - A value representing the reported horizontal accuracy of the current solution as detected
by the receiver.
• Accuracy Threshold - Set the maximum distance allowed for the Current Accuracy value. If the Current
Accuracy value is greater than the set Accuracy Threshold, a DTC entry will be recorded on the Diagnostic
Trouble Code page.
Select the Accept button in the lower, right corner of the page to return to the GPS Setup tab.