Raven OMNiDRIVE, Инструкция по установке и эксплуатации

Страница: 251 / 275

Chapter 4
3. Once the tractor reaches the sync point, the tractor will continue to follow the
controlling combine speed and position.
4. Once unloading is complete, stop the sync operation. The tractor will stop and
await further commands.
5. The operator may then restart the syncing process, or send the grain cart to the
stage points or unload points as needed.
10.
Combine Status
Displays the status of all OMNiDRIVE™ devices on the combine. Tap within the
combine status display to save a new sync point.
11.
Combine
Tap the combine icon to center the map view over the combine location.
Set Stage and Unload Points
DANGER
Autonomous machines may move without someone in the cab.
Always activate the Lockout Switch before boarding the machine.
DANGER
The perception system may not be able to see all areas around the
machine. Always activate the Lockout Switch while working on or
around the machine.
Note: An alert will be displayed if any of the points used in a route are placed outside of the
external field boundary or in an area not covered on the harvest map.
251