Raven OMNiDRIVE, Инструкция по установке и эксплуатации

Страница: 19 / 275

Important Safety Information
l
After handling or applying agricultural chemicals:
l
Thoroughly wash hands and face after using agricultural chemicals and before
eating, drinking, or using the restroom.
l
Thoroughly flush or rinse equipment used to mix, transfer, or apply chemicals
with water after use or before servicing any component of the application sys-
tem.
CAUTION
Electrical Safety
l
Always verify that power leads are connected to the correct polarity as marked. Revers-
ing the power leads could cause severe damage to the Raven system or other com-
ponents.
l
To prevent personal injury or fire, replace defective or blown fuses with only fuses of
the same type and amperage.
l
Do not connect the system power cable to the vehicle ignition or battery until all sys-
tem components are mounted and all electrical connections are completed.
l
Always start the machine before initializing this Raven system to prevent power surges
or peak voltage.
l
To avoid tripping and entanglement hazards, route cables and harnesses away from
walkways, steps, grab bars, and other areas used by the operator or service personnel
when operating or servicing the equipment.
Touch Screen
l
Only touch the touch-screen with your finger or by using a special touch-screen stylus
or pen. Operating the touch-screen with sharp objects may cause permanent damage
to the screen.
l
Only clean the screen using a damp cloth. Never use caustic or other aggressive sub-
stances.
19