Ravelli R 1000 Pro, Руководство по эксплуатации и обслуживанию

Страница: 44 / 56

Use and maintenance manual R 1000 Pro
Pag.44
Rev.0 18/04/2023
EN
Stove phase general layout
Phase Description
FINAL CLEANING The stove is switching off, the cooling phase is not yet completed
IGNITION The ignition phase has started,the pellets are loaded into firebox
WAITING FLAME The pellet is lighted by the hot air passing through the ignition candle
FLAME LIGHT The flame is visible in the fire pot
WORK The stove completed switch ON phase; you can change power
FIRE POT CLEANING The stove is performing the cleaning
MODULATION The room temperature set has been reached
ECO STOP
Comfort Clima activated, temperature set has been reached; the stove is off.
T ON / T OFF
The room sensor is off or an external thermostat has been connected and the room set
is set to EXT
WAITING START
The stove is cooling DOWN: when stove is cooled down can start automatically
WAITING RESTART
The stove is in the cooling DOWN: when stove is cooled down can restart automatical -
ly.
HOT SMOKES
The maximum fume temperature threshold has been reached. To facilitate cooling, the
stove brings the capacity to a minimum with ventilation at max power level
OFF The stove is off
ANOMALY (general)
The stove has detected an anomaly; refer to the troubleshooting chapter.