background image

Use and maintenance manual R 1000 Pro

Pag.11 

Rev.0  18/04/2023

EN

 

Do not use any fuel other than fire pellet. It is strictly forbidden 

to use liquid fuels.

 

It is prohibited to use the appliance with the door or ash drawer 

open or the glass broken. 

 

Do not touch the hot surfaces of the appliance without suitable 

protective  equipment,  to  avoid  getting  burned.  When  it  is 

running, the outer surfaces reach hot temperatures to the 

touch.

 

It is forbidden to make unauthorised changes to the appliance. 

 

Before using the appliance it is necessary to know the position 

and function of the controls. 

 

If the chimney catches fire you must call the fire brigade.

 

Only use original spare parts. Any tampering and/or 

replacements that have not been authorised by Ravelli can 

pose a danger to the user’s safety.

 

In the event of particularly adverse weather conditions, the 

safety systems could intervene and switch off the appliance. 

In any case, doe not disable the safety systems.

 

Residual risks 

The appliance was designed so as to guarantee the user’s essen-

tial safety requirements. 

Safety was integrated into the appliance’s design and construction 

as much as possible. 

For every residual risk there is a description of the risk and the 

zone or part that is applies to (unless the risk applies to the entire 

appliance overall). Procedure-related information is also provided 

on how to avoid the risk and on the correct use of the personal pro-

tective equipment required by and made compulsory by the Man

-

ufacturer. 

Содержание R 1000 Pro

























































Отзывы: