USER MANUAL
–
RCS Hy-Q-52
8
5. After passing the measuring trajectory the
speed indicator will show the average speed
of the forks if it was incorrect.
The speed should be in between 10 and
35 cm/s.
For error messages see: 3.6 Error messages.
6. Lower the forks with constant speed until the
forks on the display are in their lowest
position.
7. The indicator shows the weight after
completing your zero check.
8. If the weight is red, the weighing was not
correct. If the indicator does not show zero, a
new zero must be set manually. See: 3.4.2
