USER MANUAL
–
RCS Hy-Q-52
9
3.4.2 Set zero: manually
1. Press the zero button.
2. Repeat step: 3-8 of 3.4.1.
3.5 Perform a weighing cycle
1. A weighing cycle can be started at any time in
weighing mode. As soon as you lift the weight
and pass the first sensor the indicator starts
measuring.
2. To perform a weighing cycle, pick up the load and
lift with constant speed for as long as the yellow
arrow keeps blinking in upward direction. If the
arrow turns in the opposite direction lower the
forks until the weight appears in the display.
For detailed explanation see: 3.4.1 step 3-6
If zero is off, follow these steps.
