After start-up of the indicator and before first use of the day, you better check the zero point.
The system automatically corrects its zero during the day, so the system weighs correctly with
warm oil/ parts/ sensor.
When the truck starts up the next day, the oil is cooled down and there can be greater
weighing errors than the system can correct automatically. Therefore you need to check the
zero on a cold start-up.
3.4 Start-up: check zero first
USER MANUAL
–
RCS Hy-Q-52
7
3.4.1 Check zero
1. Screen after switching on the indicator.
2. Lower the forks, if not on the ground.
3. The yellow arrow guides you in operating the
truck to complete a correct weighing.
4. Lift empty forks with a constant speed until
the blinking yellow arrow at the display
shows you to lower the forks.
Go up
Go down