Ravaglioli RAVTD4400, Руководство пользователя, Страница: 32 / 178

OPERATOR'S MANUAL
RAVAGLIOLI S.p.A.
RAV TD4400
Code M0150 - rev.1.0
(01/2008)
Page 12/ 15 RAVAGLIOLI S.p.A. – 40044 Pontecchio Marconi (BO) Via I Maggio, 3
Tel. (+39) 051/ 67.81.511 – Fax (+39) 051/ 84.64.67
e-mail: rav@ravaglioli.com /http www.ravaglioli.com
5.2 Printing of measurements taken
By selecting the following key on the data entering page, the following display
page appears:
Figure 12
After confirmation of the client data entering page, by pressing key F3 a test
report is printed comprising client data, vehicle data before and after adjustment, the
technical data of the vehicle provided by the manufacturer and any notes for the client.
By pressing key
F2 , the test performed can be also
“saved” in a special “
client
databank” to be opened subsequently.
To access the data in the client databank, press F3
from the initial page
(see
Figure 11).
Press key F4 to terminate the test. The program returns to the initial phase. At the
same time the motorised measuring heads move to the ends of the lift and any turntables
featuring pneumatic lock/release are locked.
Key of printout example shown on successive page (Figure 13).
1 -
RAVAGLIOLI manufacturer’s logo
2 - Space for personalising workshop data
3 - Automatically processed time of start and finish of test
4 - Tested vehicle and owner identification details
5 - Factory details of vehicle being tested
6 - Tested vehicle data after adjustment
7 - Front axle data table
8 - Rear axle data table
9 - Space for notes that can be entered manually
Entering
vehicle and
client data