QuickLock Operator Manual
49
QuickLock Operator Manual
– Version 15.07.01
5.2.2.2. Choosing a marker
Align the arrows on the slide with the line
directly above the ID of the pipe to be
repaired, as in the photo. This example is
lining up for the 200/250 application.
See the below chart for metric to inch
conversion.
Upper Slot
(Inches)
Upper Slot
(metric)
Lower Slot
(metric)
Lower Slot
(inches)
7.48”
190
240
9.44”
8”
200
250
10”
8.27”
210
260
10.24”
8.66”
220
270
10.63”
9.06”
230
280
11.02”
9.44”
240
290
11.42”
10”
250
300
12”
10.24”
260
310
12.20”
10.63”
270
320
12.60”
5.2.2.3. Fasten the bolts
Tighten the two bolts to lock the chassis into place for the two pipe ID available at that level.
5.2.4. Insert the wheel.
To use the smaller of the two pipe ID, insert the
wheel into the upper slot by pressing the
spring-loaded button to open the latch.
To use the larger of the two pipe ID, use the
lower slot by pressing the spring-loaded button
to open the latch.
5.2.5. Repeat for other 3 wheels
All 4 sliding chassis need to be adjusted to
match the QuickLock sleeve size.
