QuickLock Operator Manual
29
QuickLock Operator Manual
– Version 15.07.01
Preparing and laying out the sleeves
(1) First sleeve, with projecting rubber end and
with beveled end.
(2) Second and additional sleeves, with
projecting rubber end, with or without beveled
end.
(3) Last sleeve, without projecting rubber end,
with or without beveled end.
Installing the first sleeve
Make sure that the first sleeve (1) is installed
with one pair of circumferential seals in an
intact (not damaged) section of the pipe.
Installing the second sleeve (and others)
Move the new sleeve through the previously
installed sleeve(s) (1).
Note:
Watch out for the projecting rubber end.
See section 2.5.4.3.
Install the sleeve (2) with the correct metal
overlap as described in 2.5.4.4.
Installing the last sleeve
Move the new sleeve through the previously
installed sleeves (1) and (2).
Note:
Watch out for the projecting rubber end.
See section 2.5.4.3.
Install the sleeve (2) with the correct metal
overlap as described in 2.5.4.4.
