Rauch TWS 85.1, Инструкция по эксплуатации

Страница: 96 / 104

General maintenance and service 9
90
Wheel mounting:

Before mounting the wheel, clean its contact surface to the hub.

Before mounting, check the wheel nuts and bolts. Replace damaged, stiff or
corrosive wheel nuts or bolts.

Tighten all wheel nuts gradually and diagonally using a torque wrench.
- Tighten the wheel nuts with a tightening torque of 560 Nm .
- Attach and tighten all 10 wheel nuts per wheel.
Due to stress activities, the wheel nuts loosen during the first kilometres of drive
with the new load transfer vehicle or after a wheel replacement.

Tighten all wheel nuts after driving 50 km with the prescribed tightening
torque.
NOTICE
Observe the instructions and prescribed activities regarding the wheel mounting
of the axle manufacturer.