Rauch TWS 85.1, Инструкция по эксплуатации

Страница: 95 / 104

General maintenance and service
89
9
9.9.3 Replacing wheels
Requirements:

Use a jack which is able to lift a load of at least 5 tons .

Use a torque wrench for tightening the wheel nuts.
Positioning of the jack:

Position the jack in a way that the contact surface cannot be displaced under
any circumstances (e.g. by a suitable piece of wood or rubber block).
n
WARNING
Danger of accidents caused by unprofessionally executed
wheel replacement
Wheel replacements of the load transfer vehicle which are exe-
cuted unprofessionally may lead to severe accidents with personal
injury.
 Wheel replacements may only be executed at an empty
load transfer vehicle which is coupled to the tractor.
 For replacing the wheel, the load transfer vehicle must be
parked on even and solid ground.

Additionally secure the jack
against sliding away.

Attach the jack on the left or
right side under the axle
mounting [1].
Figure 9.13: Application points for jack
1