Rauch TWS 85.1, Инструкция по эксплуатации

Страница: 68 / 104

Instructions for load transfer 7
62
7.5 Fertiliser load transfer
7.5.1 Operating sequence
The control unit is used to monitor the filling levels of the attached fertiliser
spreader and the load transfer vehicle TWS 85.1.
The operating sequence depends on the operating mode selected in the
QUANTRON-A control unit:

Manual

Semi-automatic

Automatic
NOTICE
If the auger conveyor speed is too low in respect to the selected spreading
quantity of the fertiliser spreader there is no indication if the fertiliser spreader
hopper is full. This may lead to spreading errors or underfertilisation in the
spread areas due to possible empty spreading.

Increase the auger conveyor speed.
NOTICE
The load transfer function is controlled by an electronic control unit. Refer to the
operator's manual of the QUANTRON-A control unit for TWS 85.1 .
NOTICE
Ensure that all sensors are mounted correctly and are in good working order.
NOTICE
The following chapter contains an example of the load transfer function with
illustrations of the QUANTRON-A control unit. For additional details or informa-
tion on controlling your machine refer to the
operator's manual of the
QUANTRON-A control unit for TWS 85.1 .