Rauch TWS 85.1, Инструкция по эксплуатации

Страница: 79 / 104

General maintenance and service
73
9
9 General maintenance and service
9.1 Safety
Maintenance and service work involves additional hazards that do not occur dur-
ing operation of the machine.
Any maintenance and service work is to be conducted with increased alertness
at all times. Work very carefully and with awareness of danger.
Observe the following instructions in particular:

Welding and work on the electrical and hydraulic systems is to be carried out
by qualified technicians only.

Spare parts must at least comply with the technical requirements specified by
the manufacturer. This is assured e. g. with genuine spare parts.

Repair work on tyres and wheels may only be carried out by specialised staff
with the suitable mounting tools.

Before starting any cleaning, maintenance, or service work, and when trou-
bleshooting, switch off the tractor's engine and wait until all moving parts of
the machine have come to a stop.

Only an instructed and authorised workshop may carry out repair work.
NOTICE
Please note the warnings in chapter 3: Safety, page 5 .
Take particular note of the instructions in section 3.8: Maintenance and ser-
vice, page 13 .