Commissioning
43
6
6.6.4
Braking system
The machine is equipped with a
compressed air braking system
.
In connection with the braking system, please also refer to the respective national
regulations of the country where you use the machine.
The machine is equipped with an automatic parking brake as a standard.
For commissioning, please observe the following instructions:
Before connecting, clean the gaskets and the coupling heads of the pneumatic
system.
Observe the connecting sequence: See
.
After connecting and before every drive, check the leak-tightness and the
function of the braking system. To do so, apply the driving brake of the tractor.
Do not drive with the connected machine until the manometer in the tractor
cabin shows the operating pressure intended for the tractor.
n
WARNING
Risk of injury due to unsecured machine
Until fully connected the machine may roll away and cause per-
sonal injury. When connecting the machine always observe the fol-
lowing procedure for the compressed air lines.
Ensure that nobody is in the hazard zone.
First, connect the yellow coupling head (brake line).
Then, connect the red coupling head (supply).
NOTICE
For further information, please refer to the operator’s manual of the tractor.
Содержание TWS 85.1
