We recommend the layout plan up to a spreading width of
24
m
. A layout plan for greater working
widths is included in the PPS 5 practice test kit.
•
Width of testing area: 3 x track distance
•
Length of test area: 60 to 70 m
•
The three tracks must be parallel. If you are running the test without drilled tracks, the tracks must
be measured using a tape measure and marked (e.g. with rods).
Fig. 52: Layout for three passages
Preparing three passes:
u
Select a similar fertilizer from the fertilizing charts and set the spreader accordingly.
u
Set the mounting height of the machine as specified in the fertilizer chart. Make sure that the
mounting height includes the top edge of the trays.
u
Check the spreading elements (spreading discs, spreading vanes, outlet) for correct functioning
and completeness.
u
Place two collecting vessels one in front of another at a distance of
1
m
in the overlap zones
(between the tracks) and in the track (according to
)
n
Run the spreading test with the determined open position for operation:
9. Spreading operation
MDS 8.2/14.2/18.2/20.2
5902916
91
