9.12.2
Adjustment of the row spacing and spreading width
Row spacing adjustment
u
Release the bolts [1].
u
Set the plates [2] according to the desired
row spacing.
Fig. 60: Plates on the row spreading system
Setting the width of the fertilizer rows
u
Remove the cotter pin [3].
u
Determine the position of the side plate [1]
via the adjusting plate [2].
u
Insert the link into the corresponding hole.
u
Secure the link with the cotter pin [3].
The position of the side plate is secured.
u
Repeat the procedure on the other side.
w
The position must be the same on both
sides.
Fig. 61: Adjustment on the row spreading system
Small corrections between the configuration steps can be achieved through higher or lower
mounting on the machine.
9.12.3
Setting the application rate
Example of calculation of the application rate:
•
Two rows should be spread.
•
The distance between the two rows to be spread is 3 m.
○
The effective working width is therefore 6 m (driving along every second track).
9. Spreading operation
MDS 8.2/14.2/18.2/20.2
5902916
103
