TECHNICAL INFORMATION - SERVICE
Page 1 of 1
2014-10-26_TI_Label_en
PRODUCT LINE
AXIS-M EMC, AXIS-H EMC
DATE
26/10/2014
TOPIC
Efficiency labels on the EMC transmission
All M-EMC and H-EMC transmissions are tested on a specifically developed load test
bench prior to installation. Here, the efficiency and control parameters are determined.
These parameters are the basis of the exact control of the systems.
Problem:
In case of service, e. g. if a QUANTRON or an implement ECU is exchanged, the parameters
must be re-entered in the control unit of the relevant machine.
In the past, these parameters had to be requested by telephone from the RAUCH customer
service.
Improvement:
Since
10/10/2014 (AXIS
# 39602)
,
each transmission is equipped with a label:
Example: H-EMC serial number 1631 Example: M-EMC serial number M0323
The label is located at the front of the relevant transmission in the direction of travel
This means that in the case of service, the parameters can be read from the label and entered
in the control unit.
The parameters are still stored in a database so that the corresponding parameters can be
requested from the technical customer service of RAUCH Landmaschinenfabrik GmbH by
quoting the transmission number or the serial number of the spreader if the label is
mechanically damaged.
