4
(1)If you have the FR-MDK1, follow the instructions in Chapter 2-1 first. Then,
after making sure your computer is turned off, attach the FR-MDK1 to a 5
inch bay as shown below.
(2)You have to connect a power cable of your computer to the power connector
on the back panel of the FR-MDK1. Refer to how to connect a 12V/5V
power cable as described in the next page for more information.
Power Connector
Refer to how to connect a
12V/5V power cable as
described in the next page.
1394 port
2-2.How to attach the FR-MDK1 to your computer
The two upper LED aren’t
used. Use individual LEDs
on each key.
NOTE
If you have the FR-DK2, the following two upper LED aren’t used.
