3
2. Setting
This chapter explains how to set up FireDock series before you use it.
-How to attach a 3.5 inch HDD to FireDock series(Chapter 2-1, 2-2)
-How to install Storage Supplement for Windows 98SE users(Chapter 2-3)
-How to install FRDKDOWN bug fix utility for Windows Me users(Chapter 2-4)
-How to install utility for MacOS 9.1/9.0.4 users(Chapter 2-5)
-How to install FireWire driver software for MacOS 9.0.4 users(Chapter 2-5)
2-1.Attaching a HDD to FireDock series
Here is an explanation of how to attach a HDD to the FR-DK1. Follow the
same procedure for the FR-DK2, FR-MDK1.
(2)Slide cover off the HD case and connect power and data cable to the HDD.
Mount the HDD in the HD case with the screws provided.
(NOTE)You have to set [MASTER] position in HDD jumper setting. If
you have a Western Digital HDD, set [SINGLE] position in HDD
jumper setting. For more information, refer to its manual.
(3)Reinstall cover on the HD case and push the HD case into the removable
case.
(4)Lower handle and use the provided lock key to lock the HD case. If you don’t
lock it, FireDock won’t work. If you lock the HD case, the POWER
LED(GREEN) will come on when it is powered.
(1)Turn the key switch to the UNLOCKED POSITION. Then, lift handle to
release the HD case from the removable case and pull out.
Key switch
Power switch
Screws
Power cable and data cable
Handle
Power LED
Access LED
Cover
HD case
Removable case
Handle
