CommScope BUDI-2S-SP, Инструкция по установке

Страница: 1 / 8

1. General
BUDI is a building distributor with a fiber management system offering
splicing functionality. It provides mechanical and environmental
protection for fiber optic components.
2. Kit content
BUDI-2S-SP
I N S T A L L A T I O N I N S T R U C T I O N
3. Feeder cable installation
3.3 Cut the rubber seal where the feeder cable will be installed.
3.4 Break off the parts needed for feeder cable termination.
3.2 Strip the loose tube 2cm after the outer jacket.
3.1 Strip the feeder cable (1.5m) and leave some aramid yarn for
termination.
TC-1088-IP
Rev A, Mar 2017
www.commscope.com