Rato R1000I, Руководство по обслуживанию

Страница: 36 / 47

T appet assembly
Assembling:
It should be confirmed that
there is no wear at both ends
and the rod is straight, and
then it is inserted into the
crankcase tappet hole through
the cylinder head and placed
in place.
Oil shield
Valve spring
Assembling:
It should be confirmed whether the
cone surface is defective or not,
and then the installation is
performed.
Intake
valve
Assembling:
The valve shall not be
confused.
Be careful when installing and
do not injure the valve stem.
Valve spring seat
Valve rocker shaft
Valve rocker
Assembling:
Check the contact
surfaces of the central
bore and the valve tappet
for wear before
installation.
Exhaust valve