20
Processo di conteggio
Report | Risultato del conteggio dettagliato
Funzione accorpamento (Batch)
Collegare il cavo di alimentazione con il collegamento sul lato posteriore del CS 500 e inserire la spina di ali-
mentazione in una presa. Accendere l’apparecchio. L’apparecchio effettua ora un test autonomo ("WAIT") fino
alla comparsa di “0 PCS” e “0.00” sul display. Inserire le monete nell’ingresso per monete e avviare il processo
di conteggio tramite il tasto START|STOP. Le monete vengono ora suddivise nei singoli cassetti per monete.
Quando tutte le monete sono state contate e divise, il processo di conteggio si blocca automaticamente. Potete
bloccare il processo di conteggio anche tramite il tasto START | STOP. Il risultato del conteggio viene visualiz-
zato sul display. Numero superiore: quantità di monete contate (PCS). Numero inferiore: valore totale delle
monete contate in Euro. Sopra il cassetto per monete potete controllare in quale cassetto sono state inserite
quali monete. Per eliminare i risultati dei conteggi, premere il tasto CLEAR. Dopo aver spento l’apparecchio, i
risultati dei conteggi vengono automaticamente cancellati.
Premendo il tasto “REP” potete richiedere i risultati dettagliati di un processo di conteggio per valore delle mo-
nete. Premendo nuovamente il tasto “REP” si passa al valore di moneta successivo. Premendo il tasto “START |
STOP” si torna all’importo totale.
Impostazioni nel menu di impostazioni
Premendo il tasto “SET” si visualizza il menu di impostazioni. Premendo il tasto “START | STOP” si può uscire
in ogni momento dal menu di impostazioni.
La CS 500 consente di contare un determinato numero di monete da un numero maggiore di monete, ad esem-
pio per comporre tubi di monete. Per definire il valore dell’insieme / blocco del conteggio per i singoli cassetti
per monete, aprire la panoramica con il tasto SET.
Viene mostrato il seguente link: il valore superiore mostra il valore della moneta selezionata, il valore inferiore
è il blocco del conteggio impostato, raggiunto il quale l’apparecchio smette di contare. Il valore zero indica che
non è stato impostato un blocco del conteggio. Premendo il tasto “PRINT”, si possono cambiare i blocchi del
conteggio dei singoli tipi di monete. Utilizzare i tasti “+” e “-” per modificare i valori. Tenendo premuti i tasti
“+” o “-”, il valore aumenta / diminuisce a ritmo di 10. Premere il tasto “CLEAR” per cancellare un blocco del
conteggio impostato. Premendo il tasto “CLEAR” per circa 2 secondi si cancellano tutti i blocchi del conteg-
gio impostati. Premere il tasto “START | STOP” per uscire dal menu di impostazioni. I blocchi del conteggio
impostati vengono salvati. Quando viene raggiunto un blocco del conteggio di un tipo di moneta, l’apparecchio
blocca il processo di conteggio e viene visualizzata la seguente notifica:
€
BAT ON
[IT]