15
Setzen Sie das Transportrad nach dem Reinigen wieder in die ursprünglichen Position ein, indem Sie die
Vorrichtung nach unten drücken und auf 1 oder 2 schieben.
Setzen Sie die Abdeckung wieder auf das Gerät. Schieben Sie die Sicherheitsverriegelung auf der Rückseite
zum geschlossenen Schlosssymbol und setzen Sie die Münzbecher wieder in das Gerät ein.
Reinigen Sie das
Transportrad samt des
äußeren Schwaren Ringes mit
dem Reiniugungspinsel
Sortierbereich
Sensoren an
beiden Seiten der
Sortierlöcher
Fehlercode
Grund
Lösung
ERR 1
Infrarotfehler Sensor 1 (1 Cent)
Reinigen Sie den entsprechenden
IR-Sensor. Wenn der Fehler dadurch
nicht behoben wird, kontaktieren Sie
unseren Kundenservice.
ERR 2
Infrarotfehler Sensor 2 (2 Cent)
ERR 3
Infrarotfehler Sensor 3 (5 Cent)
ERR 4
Infrarotfehler Sensor 4 (10 Cent)
ERR 5
Infrarotfehler Sensor 5 (20 Cent)
ERR 6
Infrarotfehler Sensor 6 (50 Cent)
ERR 7
Infrarotfehler Sensor 7 (1.00 Euro)
ERR 8
Infrarotfehler Sensor 8 (2.00 Euro)
ERR 9
Infrarotfehler Hopper Sensor
CLOSE HOPPER
Nach dem Öffnen der Maschine wurde
vergessen, die Sicherheitssperre in die
geschlossene Position zu schieben.
Schieben Sie den Schalter der
Sicherheitssperre in die geschlossene
Position
BRUSH
Die Transportbürste/das Transportrad muss
ausgetauscht werden.
Kontaktieren Sie für den Austausch
unseren Kundenservice.
Fehlermeldungen
[DE]