Rational iVario Pro L, Оригинальное руководство по установке

Страница: 52 / 72

9 | Waste water connection
52 / 72 80.06.231_iVarioProL-iVarioProXL_IM_en-GB
Install the drain at the front of the unit
If the waste water drain is installed at the front of the unit, a bracket is required
on the side of the unit.
a
There is a drain channel with a drain grating on the front of the unit.
1. Screw the bracket to the bottom of the unit.
2. Connect the drain pipe and pass it through the bracket to the front of the
unit.
3. Observe a minimum distance of 25 mm [1 Inch] between the drain channel
and waste water drain. The manufacturer recommends a minimum dis-
tance of 50 mm [2 Inch] to make cleaning easier.
25 mm [1 Inch]
>>
The drain pipe is installed with a fall of at least 5% or 3° with the outlet to-
wards the front.
Manufacturer's recommendation for the installation of units with a substructure
with electric height adjustment.
a
The drainage connection kit model L, XL is ready for use.
a
The installation height on the wall is between 150 mm and max. 300 mm
(1).
1. If you have a connection with a flexible hose, connect an additional ventila-
tion pipe (2).