Rasonic RC-S70U, Руководство по эксплуатации и инструкция по установке

Страница: 39 / 44

Step 8: Install the air filter and front panel
1. Insert the air filter into the frame’s slot from upside to underside.
(See Fig. 2)
2. Hang the front panel on the frame’s buckle, then press the front
panel into the frame’s slot until you hear a click (see Fig.11).
3. Switch unit on. Check for operation of the unit and check for
vibration after installation.
4. Fit the drain pan to the cabinet and run a drain hose to a suitable
location if required.
Fig.11
17
NOTE: For the unit with power cord comes out from left side,
please perform the following steps:
1.
Pull the power cord to the left side straightly(See Fig.a & b).
2.
Wrap the PVC protecing sheath on the power cord with cable ties in the hole position (see Fig.c).
3.
Tie up the power cord on the frame (see Fig.d & e) (Applicable for
RC-S180U/RC-S240U
only)
4.
Install the frame and front panel according to the above Step 6 and Step 7.
Fig.a
Fig.b
Fig.c
Fig.d
Fig.e
Fig.f