Rasonic RC-S70U, Руководство по эксплуатации и инструкция по установке

Страница: 33 / 44

11
When the unit is off, press the "TIMER" button to initiate the Auto start program, press it again within 10 seconds will initiate the Auto stop program.
Press or hold the "UP" or "DOWN" button to change the Auto time by 0.5 hour increments, up to 10 hours, then at 1 hour increments up to 24 hours.
The control will count down the time remaining until start.
The system will automatically revert back to display the previous temperature setting if there is no operation in a 10 seconds period.
Turning the unit ON or OFF at any time or adjusting the timer setting to 0.0 will cancel the Auto Start/Stop timer program.
•
•
•
•
POWER:
Press the POWER keypad to turn the unit on/off.
MODE:
Press the "MODE" keypad to select the appropriate operating mode. The mode selection will alternate between AUTO, HEAT(not applicable for
only models), COOL, FAN and DRY.The indicator light beside the "MODE" option will illuminate, identifying the mode selected.
DRY MODE:
This mode is used to decrease the humidity in the room. Under this mode, you cannot select a fan speed. The fan motor operates at LOW speed. Keep
windows and doors closed for the best dehumidifying effect.
COOL MODE:
The temperature setting are adjustable between 17
℃
to 30
℃
. You can select your desired fan speed.
HEAT MODE:( not applicable for cooling only model )
The temperature settings are adjustable between 17
℃
to 30
℃
in heating mode. You can select your desired fan speed.
AUTO MODE :
The fan motor remains on MED speed in AUTO mode. The unit will select the appropriate operating mode from FAN, COOL or HEAT(
not applicable for
cooling only
model) based upon the temperature difference between the actual and desired room temperature.
NOTE: On the AUTO mode, you can not adjust fan speed.
FAN MODE :
Press the "MODE" keypad to select the FAN mode, you can press "FAN" keypad to select your desired fan speed but you can not adjust temperature.
TEMPERATURE SETTINGS UP:
Press the keypad to increase the set (operating) temperature of the unit. Each time the keypad is pressed the temperature increases as follows:
1
℃ (Celsius Scale) Maximum Setting 30 ℃.
TEMPERATURE SETTINGS DOWN:
Press the keypad to decrease the set (operating) temperature of the unit. Each time the keypad is pressed the temperature decreases as follows: 1 ℃
(Celsius Scale) Minimum Setting 17 ℃.
FAN:
Press this keypad to activate the appropriate fan speed setting. Each depression of the keypad will alternate through AUTO,LOW,MED, HIGH fan speed
options. The indicator light beside the FAN speed option will illuminate, identifying the fan speed selected.
SWING:
Press the "SWING" keypad to activate the automatic air swing feature. The indicator light adjacent to the "SWING" keypad will illuminate, identifying
to the selected mode is operational. The vertical louvers will oscillate side to side automatically sweeping air alternately for comfortable cooling/heating. To
stop the air swing feature, press the "SWING" keypad again, the indicator light adjacent to the keypad will go off.
TIMER:
When the unit is on, press the "TIMER" button will initiate the Auto stop program, the "TIMER" OFF indicator light illuminates. Press the "UP"or "DOWN"
button to select the desired time. Press the "TIMER" button again within 10 seconds, the Auto start program is initiated. And t he "TIMER" ON
indicator light illuminates. Press the "UP" or "DOWN" button to select the desired Auto start time.
SLEEP:
Press and hold the "SWING" keypad for 2 seconds on the control panel or use the remote control to activate the "SLEEP" feature . Press and hold the
"SWING" keypad for 2 seconds or use the remote control again to deactivate the "SLEEP" feature. In the Cooling mode, the cooling temperature set
point will increase 1
℃
per hour after the "SLEEP" mode is selected. Two hours later, the set point will continue at this temperature and the fan motor
will remain on LOW speed. The setting will be maintained for 7 hours, then the unit exits sleep mode. Using the "SLEEP" mode will reduce noise
creating a comfortable sleeping environment
.
NOTE :
This feature is not available under DRY and FAN ONLY operation.