Rasilient PixelStor 5000, Руководство пользователя

Страница: 86 / 161

Hardware Installation
PixelStor 5000 User Manual
Rev. 1, May 2013 4-49
The Host Properties page for each host, shown in Figure 4-33, contains the following
information about the host selected from the Host List:

Name - Displays the current Host Name, or may be used with the Save Changes button
to change the Host Name.

Connection - Show the connection type and status

Initiator (IQNs/WWNs) - Shows a list of iSCSI or Fibre channel ports that have been
defined for the Host (if installed)

Target CHAP Secret - Shows the target CHAP secret or works with Save Changes
button to add a target CHAP secret.

Initiator CHAP Secret - Shows the Initiator CHAP secret or works with Save Changes
button to add an initiator CHAP secret.

Presentations - Shows a list of LUNS that have been presented to the host

Active Connections - Shows the number of active connections to the Host

Comments - Displays any comments that were added when the Host was defined or
works with the Save Changes button to add comments to a Host
Buttons

Save Changes - Works with Name, Target CHAP Secret, Initiator Secret and comment
fields to make changes take effect

Delete - Host will be deleted.

Help - Displays the Help page
4.2.8
Step 6 – Present Virtual Disks
The final step in setup is to present the Virtual Disk to the Host(s). Clicking on Step 6 Present
Virtual Disks opens the page shown in Figure 4-34. On this page, you select a VD to present
from the pull down menu that shows available VDs and click on the Ok button.