Rasilient PixelStor 300e Скачать руководство пользователя

Страница: 41 / 43

Hardware Installation

PixelStor 300e Hardware Installation Manual
Rev. 1, May 2013

2-15

The Chassis slides along the support edges of the Bracket.

Figure 2-17 Secure the Mounting Brackets

Lift the system to the desired position on the rack with the help of a second person.

Each pair of Brackets is supplied with a set of screws: 10-32, 12-24, M6. Use the size

appropriate for your Rack. For those Racks with square holes use the included flanged nuts to

secure the screws. Note the pair of screws that are attached to the chassis. Use these screws

to secure the chassis into the Rack.

2.6

PS300e SAS Connections

The PixelStor 300e functions as an expansion enclosure for the PixelStor 5000 RAID system. Up

to six PixelStor 300e expansion enclosures can be added to a PixelStor 5000 in a daisy chain

fashion using the supplied SAS IO cables to enable a maximum capacity of 72 drives. PixelStor

300e enclosures can be added while the system is running (hot-added).

The 300e is designed with external SAS connectors to connect with the PixelStor 5000 RAID

system and to other 300e enclosures. These SAS connectors can be used for upstream

connection (subtractive routing) or downstream cascading (table routing). Upstream and

downstream connections are required to be connected to different SAS connectors. Please see

Содержание PixelStor 300e












































Результаты поиска

Содержание PixelStor 300e

Отзывы:

Похожие инструкции для PixelStor 300e

Бренды по названию

Популярные бренды

Rasilient PixelStor 300e, Руководство по установке оборудования

Результаты поиска

Содержание PixelStor 300e

Отзывы:

Похожие инструкции для PixelStor 300e

Бренды по названию

Популярные бренды