About This Manual
PixelStor 300e User Manual
Rev. 1, May 2012
viii
Canadian Notice (Avis Canadien)
Class A Equipment
Japanese Notice
Taiwanese Notice
Power Cords
The power cord set included in the system meets the requirements for use in the country where
the system was purchased. If this system is to be used in another country, contact your sales
representative to purchase a power cord that is approved for use in that country.
The power cord must be rated for the product and for the voltage and current marked on the
product's electrical ratings label. The voltage and current rating of the cord should be greater
than the voltage and current rating marked on the product. In addition, the cross-sectional area
of the wires must be a minimum of 1.00mm² or 18AWG, and the length of the cords must be
between 1.8m (6 feet) and 3.6m (12 feet). If you have questions about the type of power cord to
use, contact your sales representative.
The following statement applies only to rack-installed products that are GS-Marked:
This equipment is not intended for use at workplaces with visual display units, in accordance
with §2 of the German ordinance for workplaces with visual display units."
