![background image](http://html.mh-extra.com/html/rasilient/pixelstor-300e/pixelstor-300e_hardware-installation-manual_787451032.webp)
Hardware Installation
PixelStor 300e Hardware Installation Manual
Rev. 1, May 2013
2-6
Figure 2-8 Releasing the Power Supply Module
(The power supply will require steady pressure to remove.)
To install the power supply module:
Insert the replacement power supply firmly into the bay. The retaining clip should snap. Connect
the AC power to the replacement power supply module.
Figure 2-9 Installing the Power Supply Module
Make sure that the power supply module is fully inserted and locks into place. This
insures a proper connection with the backplane.