Rasilient ApplianceStor 50 Скачать руководство пользователя страница 85 | Manualshive

Страница: 85 / 116

background image

Advanced System Use & Maintenance

User Manual

ApplianceStor

50

Rev. 1, November 2011

67

Figure 96- System panel

This connector supports several chassis-mounted functions.
1.

System power LED (3-pin PLED)

This 3-pin connector is for the system power LED. Connect the chassis power LED cable to this
connector. The system power LED lights up when you turn on the system power, and blinks when the
system is in sleep mode.
2.  Message LED (2-pin MLED)
This 2-pin connector is for the message LED cable that connects to the front message LED. The
message LED is controlled by Hardware monitor to indicate an abnormal event occurance.
3.  System warning speaker (4-pin SPEAKER)
This 4-pin connector is for the chassis-mounted system warning speaker. The speaker allows you to
hear system beeps and warnings.
4.  Hard disk drive activity LED (2-pin HDDLED)
This 2-pin connector is for the HDD Activity LED. Connect the HDD Activity LED cable to this
connector. The IDE LED lights up or flashes when data is read from or written to the HDD.
5.  Power button/soft-off button (2-pin PWRSW)
This connector is for the system power button. Pressing the power button turns the system on or puts
the system in sleep or soft-off mode depending on the BIOS settings. Pressing the power switch for
more than four seconds while the system is ON turns the system OFF.
6.  Reset button (2-pin RESET)
This 2-pin connector is for the chassis-mounted reset button for system reboot without turning off the
system power.

Auxiliary panel connector (20-pin AUX_PANEL1)

This connector is for additional front panel features including front panel SMB, locator LED and
switch, chassis intrusion, and LAN LEDs.

«
...
83
84
85
86
87
...
»

Содержание ApplianceStor 50





















































































































Отзывы:

Нет отзывов

Похожие инструкции для ApplianceStor 50

Бренд: CalDigit Страницы: 21

Бренд: Kaleidescape Страницы: 11

NECCare Gold Express5800/320Fd

Бренд: NEC Страницы: 10

Бренд: NEC Страницы: 84

NEC Express5800 Series

Бренд: NEC Страницы: 6

Бренд: Panasonic Страницы: 24

Бренд: Panasonic Страницы: 16

Бренд: XOLTA Страницы: 40

Бренд: FOR-A Страницы: 2

Бренд: Atop Страницы: 2

Бренд: IBM Страницы: 140

Бренд: G-Technology Страницы: 17

Бренд: C-Data Страницы: 26

AirStation WHR-G300N

Бренд: Hornington Страницы: 6

4-Port 10/100Mbps Ethernet Broadband Router

Бренд: AOpen Страницы: 41

SUPERSERVER 6034H-X8R

Бренд: Supermicro Страницы: 128

ADSL2+ Wireless MIMO Router

Бренд: Ace Страницы: 64

eServer BladeCenter HS40 Type 8839

Бренд: IBM Страницы: 120

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды