Rasilient ApplianceStor 50 Скачать руководство пользователя страница 52

Страница: 52 / 116

Hardware Installation

User Manual

ApplianceStor

Rev. 1, November 2011

Rebuilding the RAID with other non-RAID disk

If any of the SATA hard disk drives included in the RAID 1 array failed, the system displays the status
of the RAID volume as "Degraded" during POST. You can rebuild the RAID array with other installed
non-RAID disks.

To rebuild the RAID with other non-RAID disk:

At the prompt, press <Ctrl> + <I> to enter the Intel Rapid Storage Technology option ROM

utility.

If there is a non-RAID SATA Hard Disk available, the utility will prompt to rebuild the RAID.

Press <Enter>, and then use up/down arrow keys to select the destination disk or press
<ESC> to exit.

Figure 43-Rebuild RAID

Select a destination disk with the same size as the original hard disk.

The utility immediately starts rebuilding after the disk is selected. The status

Figure 44- Select recovery disk

of the degraded RAID volume is changed to "Rebuild".

Exit Intel Rapid Storage Technology and reboot the system.

Select Start > Programs > Intel Rapid Storage > Intel Rapid Storage Console or click the Intel

Rapid Storage Technology tray icon to load the Intel Rapid Stroage Manager utility.

Содержание ApplianceStor 50





















































































































Результаты поиска

Содержание ApplianceStor 50

Отзывы:

Похожие инструкции для ApplianceStor 50

Бренды по названию

Популярные бренды

Rasilient ApplianceStor 50, Руководство пользователя

Результаты поиска

Содержание ApplianceStor 50

Отзывы:

Похожие инструкции для ApplianceStor 50

Бренды по названию

Популярные бренды