Rasilient ApplianceStor 50, Руководство пользователя

Страница: 111 / 116

Advanced System Use & Maintenance
User Manual
ApplianceStor
50
Rev. 1, November 2011
93
Please refer to the description of the Console Redirection Settings item under COMO for details. [Mark] parity bit is
always 1
[Space] parity bit is always 0
Stop Bits [1]
Stop bits indicate the end of a serial data packet. (A start bit indicates the beginning.) The standard setting is 1 stop bit.
Communication with slow devices may require more than 1 stop bit. Configuration options: [1] [2]
Flow Control [None]
Flow control can prevent data loss from buffer overflow. When sending data, if the receiving buffers are full, a "stop"
signal can be sent to stop the data flow. Once the buffers are empty, a "start" signal can be sent to re-start the flow.
Hardware flow control uses two wires to send start/stop signals. Configuration options: [None] [Hardware RTS/CTS]
Recorder Mode [Disabled]
With this mode enabled only text will be sent. This is to capture Terminal data. Configuration options: [Disabled] [Enabled]
Legacy OS Redirction Resolution [80)24]
Configures the number of rows and columns supported on legacy OS. Configuration options: [80x24] [80x25]
COM1
Console Redirection [Enabled]
Enables or disables the console redirection feature. Configuration options: [Disabled] [Enabled]
Console Redirection Settings
Please refer to the description of the Console Redirection Settings item under COMO for details.
Network Stack
Figure 123- Notwork Stack
Network stack [Disable]
Enables or disables the network stack feature. Configuration options: [Disable] [Enable]