Chapter 4: DPX3 Series
41
DPX3 LED States
The DPX3 sensor indicates an alert by making its LED flash on and off.
The LED also flashes when the sensor is upgrading its firmware.
DPX3-T1H1:
LED states
Description
Off
Both temperature and humidity are in the
normal state.
1 flash and 1
off
Temperature enters an alarmed state:
warning or critical.
Humidity is in the normal state.
2 flashes
and 1 off
Temperature is in the normal state.
Humidity enters an alarmed state: warning
or critical.
Flashing
3 flashes
and 1 off
Both temperature and humidity enter an
alarmed state: warning or critical.
High-speed flashing
Sensor firmware is being updated.
Cascading DPX3 Sensor Packages
To increase the number of connected DPX3 sensor packages per
SENSOR port, you can cascade DPX3 using standard network patch
cables (CAT5e or higher). Up to 12 DPX3 sensor packages can be daisy
chained.
Tip: You can also make a sensor chain comprising DX2, DX and DPX3
sensor packages. See
Cascading DX2, DX and DPX3 Sensor Packages
(on page 68).
To cascade DPX3 sensor packages:
1.
Connect a standard network patch cable to either RJ-45 port of the
first DPX3 sensor package.
Note: For a Raritan EMX or PDU with the "RJ-12" SENSOR port, use
the RJ-12 to RJ-45 adapter cable instead.
2.
If you want to cascade DPX3 sensor packages, get an additional
standard network patch cable (CAT5e or higher) and then:
