Ransomes HIGHWAY 213, Инструкция для оператора

Страница: 9 / 93

8
GB
BLOCKED CUTTING CYLINDERS
Stop the engine and make sure all moving parts are
stationary. Apply brakes and disengage all drives.
Release blockages with care. Keep all parts of the
body away from the cutting edge. Beware of energy
in the drive which can cause rotation when the
blockage is released.
Keep other people away from the cutting units as
rotation of one cylinder can cause the others to
rotate.
ADJUSTMENTS, LUBRICATION AND
MAINTENANCE
Stop the engine and make sure all moving parts are
stationary. Apply brakes and disengage all drives.
Read all the appropriate servicing instructions. Use
only the replacement parts supplied by the original
manufacturer.
When adjusting the cutting cylinders take care not to
get hands and feet trapped when rotating cylinders.
Make sure that other people are not touching any
cutting units, as rotation of one cylinder can cause
the others to rotate.
To reduce the fire hazard, keep the engine, silencer
and battery compartments free of grass, leaves or
excessive grease.
Replace worn or damaged parts for safety.
When working underneath lifted parts or machines,
make sure adequate support Is provided.
Do not dismantle the machine without releasing or
restraining forces which can cause parts to move
suddenly.
Do not alter engine speed above maximum quoted
in Engine Specification. Do not change the engine
governor settings or overspeed the engine.
Operating the engine at excessive speed may
increase the hazard of personal injury.
When refuelling, STOP THE ENGINE, DO NOT
SMOKE. Add fuel before starting the engine, never
add fuel while the engine is running. Use a funnel
when pouring fuel from a can into the tank. Do not
fill the fuel tank beyond the bottom of the filler neck.
Replace all fuel tank and container caps securely.
Store fuel in containers specifically designed for this
purpose. Refuel outdoors only and do not smoke
while refuelling.
If fuel is spilled, do not attempt to start the engine
but move the machine away from the area of
spillage and avoid creating any source of ignition
until fuel vapours have dissipated. Allow the engine
to cool before storing in any enclosure. Never store
the equipment with fuel in the tank inside a building
where fumes may reach an open flame or spark. If
the fuel tank has to be drained, this should be done
outdoors. Do not spill fuel onto hot components.
When servicing batteries, DO NOT SMOKE, and
keep naked lights away. Do not place any metal
objects across the terminals.