Vector Solo Waterborne Applicators - Maintenance
38
Ransburg
Figure 62: Fluid Fitting Removal
Power Module - Fluid Fitting
Removal
1. Remove power module from handle.
4. Install the rear seal.
5. Install air valve.
Figure 59: Rear Cartridge Seal Replacement
Figure 60: Air Valve Replacement
Figure 61: Power Module Removal
2. Remove two (2) screws using a 2.5mm
Allen wrench.
Figure 58: Air Valve Cartridge Alignment
3. Install the air valve cartridge. Align the cartridge
with tab at 12 o'clock posiition.
6. Reinstall barrel.
7. Install power module.
AH-08-03.6
