09/11/2018
RANS S-21 OUTBOUND
TEXT MANUAL
40
PAINT AND CORROSION PROTECTION
Painting of the S-21 OUTBOUND is optional. The information given below is only one
example of how an airplane can be painted. There are many ways to do this and this
may not represent the best method for your situation, climate, or chosen paint system.
PRIMING
•
Wipe all parts down with acetone before painting
•
Become familiar with all aspects of your paint system. If you don't feel
comfortable painting your airplane, seek professional help.
•
Wear rubber gloves and lung protection when performing the following.
1.
Clean the parts with acetone.
2.
Scuff the surface of the parts using fine sandpaper or Scotch-Brite pads.
3.
Hang the parts from a simple scaffold using wire.
4.
Apply the paint in several light coats, allowing drying between coats.
5.
Let the parts cure completely before handling.
NOTE:
After the parts are fit and drilled it will be necessary to reapply
primer before final assembly.
PAINTING
•
Wipe all parts down with acetone before painting
•
Become familiar with all aspects of your paint system. If you don't feel
comfortable painting your airplane, seek professional help.
•
Wear rubber gloves and lung protection when performing the following.
1.
Clean the surface of the aircraft with acetone.
2.
Scuff the surface with Scotch-Brite and blow off
3.
Mask off all areas that you don’t want paint applied.
4.
Follow the manufacturer’s recommendations for the paint system you have
chosen.
