Ranpump E40-SX, Руководство по эксплуатации и техническому обслуживанию

Страница: 8 / 23

Pump package must be at least 130 grams and produced from the kraft carton. It must be fully
covered with packaging separators.
5.0. MOUNTING AND CONNECTION OF DIAPHRAGM PUMP
A typical setup configuration is shown in figure 7. Further information and consultation on pump
setup can be provided by your Ran Pump distributor.
ALWAYS USE ORIGINAL RAN PUMP PARTS AND ACCESSORIES. FAILURE TO DO SO
WILL INVALIDATE THE GUARANTEE
Pump should fixed firmly to the ground or platform and should be fitted in a perpendicular
position as shown in Figure 5. Never place the pump at an angle, lying on the ground or upside
down. The pump will not run correctly and check valves and diaphragms will wear out very
quickly due to constant dry running.
When installing the pump ensure that it is balanced correctly when using a lifting device.(Figure
5)
5.1. Mounting Pump
Keep the points below in mind when choosing the pump mounting place.
-
Easy access when operating or maintaining.
- (Air valves, inlet and outlet manifolds of air and fluid, etc.)
-
Pump weight in relation to the ground/platform.
-
Vibration emission to the ground and other equipment.
Figure 5
– Minimum space requirement around the diaphragm pump.