Ranger 168 Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 77

Ranger 168 Скачать руководство пользователя страница 9

Special Information

SPECIAL INFORMATION

The following special information is intended to alert you to possible

dangers and to information important to the safe operation of your boat
and other equipment. Observe them carefully. However, simply being
aware of the “WARNING”, “CAUTION” AND “NOTICE” notations in this
manual will not eliminate the dangers that they signal if you do not
implement the information. These warnings, plus common sense
operation will insure you a safe and fun boating or fishing outing.

Please take special note when you see one of the following signs:

ALL information or instructions in this manual could be necessary for

proper operation and/or maintenance. If you do not understand any
portion of this manual, please contact your Ranger dealer or our
Customer Service Department for any additional information.

IMPORTANT:
Your Ranger Dealer’s Responsibilities…

Generally, it is the dealer’s responsibility to the customer to make sure

that the boat has been equipped as ordered with a properly installed and
functioning engine that is within the horsepower rating specified for that
model boat. The dealer should see that the engine is outfitted with the
proper propeller for that boat model and for the load that the boat is
normally expected to carry.

The dealer should help to familiarize the customer with the onboard

equipment and explain operation of this equipment; the engine operation;
and the proper functioning and operation of the boat itself.

9

Failure to follow the advice of a
“WARNING” may result in bodily injury

or death.

Non-compliance with “CAUTION”
instructions could result in failure of, or

damage to, the product and/or equipment.

WARNING

CAUTION

Draws special attention to installation,
operation, or other important maintenance

information.

NOTICE

«
...
7
8
9
10
11
...
»

Содержание 168














































































Отзывы:

Нет отзывов