Ranger 168 Скачать руководство пользователя страница 13

Страница: 13 / 77

Hazard Labeling

WARNING

Avoid serious or fatal
injury.
Do not occupy seat
when speed exceeds 5
MPH. Avoid injuries
from dislodged seat.
Secure unoccupied
seat.

Designed Application

Class B

The Springfield Marine Company

1093 Cynthia St. • PO Box 588 • Nixa, MO 65714

IIN

TIRE PRESSURE
MUST BE MAINTAINED
FOR PROPER LOAD
CARRYING AND TO
AVOID IRREGULAR
WEAR!

Always insert
Safety Pin Here

Always insert coupler latch

safety pin into coupler latch

hole prior to towing!

WARNING

DANGER

Carbon monoxide (CO) can cause brain damage or death.

Engine and generator exhaust contains odorless and
colorless carbon monoxide gas.

Carbon Monoxide will be around the back of the boat when
engines or generators are running.

Move to fresh air, if you feel nausea, headache, dizziness, or
drowsiness.

NW-206-05

WARNING

Spinning handle could cause
serious injury. Hold handle
firmly when ratchet isunlocked.
Not for moving people or loads
over people.

204457B

CAUTION

Always make your extension cord

connection on the chargeer side
before connecting to a nearby
120VAC GFCI protected (Ground
Fault Circuit Interrupt) outlet. Failure
to use a GFCI outlet may result in
electric shock.

WARNING

Visability from the seated position at this helm is limited.
Avoid serious injury or death from collisions.

Operation from a standing position may be necessary to
maintain a lookout as required by Rules of the Road. Read
owners manual.

GM1906501

WARNING

Max TrailerGVWR: 7000 lbs.

Max Tongue Load: 700 lbs.

Min Tongue Load: 350 lbs.

READ OWNERS MANUAL

BEFORE USING

Always insert coupler latch

safety pin into coupler latch

holes before towing.

Check brake fluid level each

time before towing.

USE ONLY 2” HITCH BALL

MODEL 70LP

SAE CLASS 4

TIE DOWN ENGINEERING

WWW.TIEDOWN.COM

US Patent No. 6,375,211

#15601

CAUTION

CHECK ENGINE

CLEARANCE BEFORE

TRIMMING

Содержание 168














































































Результаты поиска

Содержание 168

Отзывы:

Ranger 168, Руководство пользователя, Страница: 13 / 77

Результаты поиска

Содержание 168

Отзывы: