Ranger 168 Скачать руководство пользователя страница 52 | Manualshive

Страница: 52 / 77

Ranger 168 Скачать руководство пользователя страница 52

Electrical System

ELECTRICAL SYSTEM

FUSE PANEL INFORMATION

On some models, the fuse panel is located for easy access and

features plug-in type ATC fuses. The fuses can be easily inspected and
replaced. Z Comanche along with certain Fisherman and Saltwater
models have no replaceable fuses. Circuits are reset as outlined in that
models Electrical System section. The Panel has a capacity of twelve to
sixteen individual circuits. The particular accessory(ies) they operate are
shown on the decal on the right side of the fuse panel or back side of the
fuse panel cover.

To improve the performance of the batteries, turn the master

breakers to the off position when the boat is not in use

. Electronics,

stereos and other items that the boat may be equipped with, could have
a current draw even when those items are turned off. If you leave your
boat in the water, leave the breaker turned on in order for the automatic
bilge pump to have power. If conditions are such that the bilge pump is
operating frequently, it will be necessary to check the battery for its state
of charge and to charge as needed. On Saltwater models equipped with
digital switching, you may leave the main breaker and all cut off switches
turned to the off position while the boat is not in use. The auto bilge pump
on these models is connected directly to the battery and fused
independent of the main breaker.

52

Do not exceed recommended fuse sizes.
Always install proper rated fuse when

adding accessories to the fuse panel.

CAUTION

Inspect battery compartment(s) before
plugging in AC power to charger. Inspect
for loose wires, cracked battery, etc.

CAUTION

«
...
50
51
52
53
54
...
»

Содержание 168














































































Отзывы:

Нет отзывов