Ranger 168 Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 77

Ranger 168 Скачать руководство пользователя страница 12

Hazard Labeling

HAZARD LABELING

The hazard warning decals shown on the following pages may be

found in various locations on your boat and trailer (photos are not
necessarily to scale). Some labels are not appropriate for every
boat/trailer model so your rig may not have them all. Check with your
Ranger dealer to find out what labels your boat and trailer should have
and ask them to order any necessary replacements.

12

Install ski pylon securely before use.
Insert pin thru receiver and ski tow pylon.
Pushing pylon into mounting hole until red
line is no longer visible. Install pin thru
receiver and pylon to secure position.
Failure to secure pylon may result in
possible injury or death.

WARNING

Rotating propeller can cause
serious injury or death.
Never approach or use ladder
when motor is running.

WARNING

Rotating propeller can cause
serious injury or death.
Shut off motor when near
persons in water.

WARNING

Fuel vapors are a fire and explosion
hazard. To avoid injury or death, do not
store fuel or flammable liquids here.

WARNING

Avoid serious injury or death
from fire or explosion, resulting
from leaking fuel. Inspect
system for leaks at least once
a year.

WARNING

Avoid serious injury or death from

fire, explosion or electrical shock.

• Ensure power is turned off before

connecting to an AC source.

•

Make connection in an open
atmosphere free of explosive fumes.

• Make connection in a secure manner

that will avoid contact with the water.

WARNING

WARNING

SUDDEN TURNS ABOVE 30 MPH MAY CAUSE

LOSS OF BOAT CONTROL. AVOID SERIOUS

INJURY OR DEATH. REDUCE SPEED BEFORE

ATTEMPTING A SUDDEN SHARP TURN.

READ OWNERS MANUAL.

!

WARNING

Engine mounting location preset at the factory.
Adjustments can result in damage to control
system equipment. Control system damage can
result in serious injury or death. Regularly inspect
control system and clearances at all trim angles.

!

WARNING

Carbon monoxide (CO) can cause
brain damage or death.
Engine and generator exhaust contains
odorless and colorless carbon
monoxide gas.
Signs of carbon monoxide poisoning
include nausea, headache, dizziness,
drowsiness, and lack of consciousness.
Get fresh air if anyone shows signs of
carbon monoxide poisoning.
See Owner’s Manual for information
regarding carbon monoxide poisoning.

NW-204-05

WARNING

MAXIMUM HORSEPOWER RATINGS

125 HP WITH TILLER STEERING

150 HP WHEN EQUIPPED WITH

ENGINESTEER

®

HYDRAULIC

TILLER STEERING SYSTEM

!

«
...
10
11
12
13
14
...
»

Содержание 168














































































Отзывы:

Нет отзывов