Ranger Products R715, Инструкция по установке и эксплуатации

Страница: 10 / 36

10
5. Carefully remove the rest of the plastic wrapping
from the Tire Changer. Keep the wrapping on the Tower
assembly as it will assist in keeping the Tower/Arm
assembly from moving during installation.
6. Remove the four front and rear Bolts and Nuts holding
the tire changer to the pallet. (See Figs. 6.6 & 6.7)
CAUTION!
Handling of the machine must be performed only
with an appropriate lifting device such as a forklift
or shop crane. Only personnel who are experienced
and qualified on material handling procedures
should handle any transportation or moving of
machine .
7. Using a shop crane or fork lift with lifting straps,
remove the Tire Changer from the wooden pallet. Use
only properly rated lifting straps under the Tire Changer
base. (See Fig. 6.8)
8. Locate the tire changer using the guidelines in
Section 7, page 11.
Fig. 6.7
Fig. 6.8
Fig. 6.6